The Mira 5S Redline (40W) and Mira 7S Redline (60W) are the two entry-to-mid CO2 lasers in the AEON Mira lineup we carry. Both are single-phase compatible and both are popular picks for small shops, classrooms, and makerspaces. The question is which one fits your work. This guide breaks down the differences and points you at the right pick.
AEON Mira 5S Redline: The Compact Choice
The Mira 5S Redline is the smallest Mira in the lineup and a common pick for shops adding CO2 laser capability for the first time, or for spaces where floor area is tight. The 40W tube handles wood, acrylic, leather, paper, HDU, and most non-metallic materials cleanly at standard thicknesses. Single-phase compatible, so it fits in a standard shop without electrical upgrades.
Most popular for:
• Schools and education buyers running structured CAD and laser programs
• Makerspaces with member laser use plus light commercial work
• Small custom shops adding laser capability for the first time
• Sign shops doing lower-volume detail and engraving work
AEON Mira 7S Redline: Mid-Range Workhorse
The Mira 7S Redline (60W) is the mid-range Mira and a common choice for sign shops, custom builders, and growing production businesses. Larger bed than the Mira 5S Redline, more cutting depth, faster throughput on production work, still single-phase compatible. This is where a lot of shops doing daily production end up.
Most popular for:
• Sign shops cutting acrylic letters and HDU profiles daily
• Custom builders adding laser detail to woodworking projects
• Growing production shops moving past entry-level desktop capabilities
• Makerspaces with consistent commercial work alongside member use
Bed Size and Material Capacity Differences
The Mira 7S Redline has a larger usable bed than the Mira 5S Redline, which matters when you’re cutting larger acrylic panels, sign blanks, or batching multiple parts in a single setup. The 60W tube also handles thicker hardwood, denser acrylic, and HDU in fewer passes. If your work fits cleanly on the Mira 5S bed and you’re not running heavy daily production, the smaller machine is plenty. If you’re regularly bumping up against the bed size or running thicker production material, the Mira 7S earns the upgrade.
Power, Speed, and Production Throughput
The jump from 40W to 60W is meaningful in production. The Mira 7S cuts faster on material the Mira 5S handles, runs single-pass on material that takes multiple passes on the Mira 5S, and handles longer production runs without the tube running hot. For a shop running the laser 15+ hours a week, the Mira 7S saves real time. For a shop running under 10 hours a week or doing mostly engraving and detail, the Mira 5S has the better ROI.
Price Difference and Total Cost of Ownership
At the product page price, the gap is roughly $2,500 (Mira 5S Redline around $6,999 vs Mira 7S Redline around $9,499). The site displays pricing in your local currency. For that delta you’re buying 20W more tube power, a larger bed, faster throughput, and more material thickness headroom. Total cost of ownership is similar between the two machines; both run on single-phase, both use the same consumables in the long run (lenses, mirrors, replacement tube every 8,000 to 10,000 hours of use). Laser parts and consumables come from the manufacturer.
Which Shop Type Should Buy Which Machine
Buy the Mira 5S Redline if:
• You’re a school, makerspace, or education-focused buyer
• Your work is primarily engraving, detail, and small-format cutting
• Floor space is tight and the smaller footprint helps
• Your laser use is under 15 hours per week
• You want the lowest entry point into a commercial-grade Mira
Buy the Mira 7S Redline if:
• You’re a sign shop or custom builder running daily production
• You regularly cut larger panels that won’t fit the Mira 5S bed
• Your laser use is 15+ hours per week
• You’re cutting thicker hardwood, dense acrylic, or HDU regularly
• You want the headroom of 60W for growth
Canadian Buyer Notes
Both machines are available to Canadian buyers through Simply Technologies. Site pricing displays in your local currency (CAD, USD, EUR, or GBP). A written quote will include freight to your shop and any applicable duty. Laser parts and consumables come directly from the manufacturer; we coordinate warranty and parts ordering on your behalf. Optional install and training packages are available when your team wants help getting the machine dialed in.
Frequently Asked Questions
How much do the Mira 5S Redline and Mira 7S Redline cost?
At the product page price, the Mira 5S Redline starts around $6,999 and the Mira 7S Redline starts around $9,499. The site displays pricing in your local currency. A quote will include freight and any applicable duty.
Can the Mira 5S Redline handle commercial production work?
Yes, for moderate volume. The Mira 5S Redline is built for daily commercial use within its envelope: smaller signs, engraving, detail cuts, and most non-metallic materials at standard thicknesses. For high-volume daily cutting on larger panels or thicker material, the Mira 7S Redline is the better fit.
What materials can both lasers cut?
Both cut wood, acrylic, leather, paper, cardboard, fabric, HDU, foam, rubber, and most non-metallic materials. Coated metals can be engraved or marked but not cut through. Neither cuts bare metal.
Do either require three-phase power?
No. Both the Mira 5S Redline and Mira 7S Redline are single-phase compatible. We confirm your electrical setup before quoting.
Is install and training included?
Install and training are available as optional packages. Standalone laser orders ship without on-site setup. Many first-time CO2 buyers add the package the first time around; experienced operators often handle setup in-house.
Get a Quote on Either Mira
If you’re trying to decide between the Mira 5S Redline and Mira 7S Redline, tell us about your shop and the work you’re doing. We’ll give you a straight recommendation and a written quote.